- ±0.3°C accuracy
- CAL CHECK®
- Ideal for spot checks
- Fast and accurate results
If you ever wished that your temperature measurements could be made a little easier, the Checktemp® might just be what you’re looking for! The Checktemp® offers high accuracy over a wider range without worrying about breakage or condensation.
The Checktemp® offers NO breakage, NO waste, NO injuries, NO difficulty in reading; not even a parallax error by taking a wrong measurement due to the angle of view!
Checktemp® is provided with HANNA’s unique CAL CHECK™ function for accurate measurements every time: simply activate a switch and the instrument will simulate an ice bath of 0.0°C (32.0°F) signal that is displayed on the LCD within a range of ±0.3°C (±0.5°F).
The sharp-tip probe of the Checktemp® easily penetrates semisolid products, making routine controls simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements.
Models with factory calibration certificate against NIST standards are also available.
HI 98501 (Checktemp?C) is supplied with penetration probe, protective cap, battery and instructions.
For model with Factory Calibration Certificate, order HI 98503
||-50.0 to 150.0?C
||?0.3?C (-20 to 90?C)
||fixed stainless steel
105 x dia 3 mm (4.1 x dia 0.1") (penetration)
|Battery Type / Life
||1.5V / approximately 3000 hours of continuous use
||0 to 50?C (32 to 122?F); RH max 95%
||66 x 50 x 25 mm (2.6 x 2.0 x 1.0") - meter only
||50 g (1.8 oz.) - meter only
This product was added to our catalog on Tuesday 30 November, 1999.