Apps Laboratories Testing solutions for:
Agriculture, Environmental, Industrial, Laboratory, Education, Home, Health & Medical, Food & Beverage



Hanna Instruments HI98304 DiST4 conductivity tester

$106.70

 

  • Graphite electrodes
  • ATC
  • Simple one point calibration
  • Easy to use
  • Economical

 

DiST’s are rugged and reliable pocket-sized testers that offer quick and accurate readings of conductivity or TDS.

The DiST® family of testers is widely used for monitoring EC/TDS in drinking water, water conditioning, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry.

This tester features an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of EC is based on Ohm’s Law, I = V/R where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface which will affect accuracy. The DiST’s non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results.

When calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.

 

Order Information:
HI 98304 (DiST 4) is supplied with protective cap, screwdriver, batteries and instructions.

Range   19.99 mS/cm
Resolution   0.01 mS/cm
Accuracy   ?2% F.S.
Calibration Solution   HI 70039 or HI 70030
Calibration   manual, 1 point
Probe   HI 73304
Temperature Compensation   automatic, 0 to 50?C (32 to 122?F)
Battery Type / Life   1.5V (4) / approx. 200 hours of continuous use
Environment   0 to 50?C (32 to 122?F); RH max 95%
Dimensions   175 x 41 x 23 mm (6.9 x 1.6 x 0.9")
Weight   95 g (3.4 oz.)

Add to Cart:

  • Shipping Weight: 0.44Kg
  • 10 Units in Stock


This product was added to our catalog on Tuesday 30 November, 1999.

Your IP Address is: 54.146.141.60
Copyright © 2016 Apps Laboratories. Powered by Zen Cart